Short-Questions

Fast solutions for complex problems

How do I fix the tension on my Brother sewing machine?

Turn the thread tension dial to a lower number (toward the left). (Loosen the thread tension.) When the upper thread is visible from the lower side of the fabric. Turn the thread tension dial to a higher number (toward the right).

Why is the tension wrong on my sewing machine?

When the bobbin thread shows on the right side, the needle tension is too tight or the bobbin thread, too loose, as shown at left in the illustration below. When the needle thread shows on the wrong side, the needle tension is too loose or the bobbin thread, too tight, as shown at right in the illustration below.

How do I get the tension right on my sewing machine?

To test if the tension is correct, insert a bobbin in the bobbin case. Then hold it up by just the thread, the bobbin case shouldn’t move. Give a little jerk on the thread and if the bobbin case slides down slightly, then the tension if perfect. If it drops freely, then it’s too loose.

What is the best tension setting on a Brother sewing machine?

The tension dial should be set between 2 to 6. b. When the upper thread is just visible on the back of the fabric, the thred tension is correct.

What is the normal tension setting on a Brother sewing machine?

4.0
The normal tension setting is 4.0. The upper thread and the bobbin thread should cross near the center of the fabric. Only the upper thread should be visible from the right side of the fabric, and the bobbin thread should be visible from the wrong side of the fabric.

What should the tension be on a Brother sewing machine?

The normal tension setting is 4.0. The upper thread and the bobbin thread should cross near the center of the fabric. Only the upper thread should be visible from the right side of the fabric, and the bobbin thread should be visible from the wrong side of the fabric.

Why is my thread bunching underneath?

Your Thread Tension Is Too Tight Make sure that you are using the same weight thread in both your bobbin and upper thread. If you don’t, your tension can be uneven and cause you to get bunched-up thread under your fabric. If your tension is too tight, it can pull your thread and break it.

What setting should my sewing machine be on?

Most sewing is done in the 2.0 to 2.5 range. If you are foundation paper piecing, you may want to decrease your stitch length so that the paper tears away easier. Top stitching and quilting are usually done in the 3.0 to 3.5 range. Basting and gathering stitches are the longest, from 4.0 – 5.0.

What should the settings be on my Brother sewing machine?

Settings for straight stitching

  1. Set the stitch length to F-4.
  2. Set the stitch width at 0.
  3. The needle position can be set to M (Middle), L (Left), or R (Right). – For twin needle sewing, always set at M.
  4. Install the zigzag presser foot.