# Short-Questions

Fast solutions for complex problems

32

## What is oblique cube?

YouTube Video – Drawing a Cube in Oblique projection. Oblique projection is a method of drawing objects in 3 dimensions. It is quite a simple technique compared to isometric or even perspective drawing. However, to draw accurately in oblique projection traditional drawing equipment is needed (see diagram below).

How do you draw an oblique view of a cube?

HOW TO DRAW AN OBLIQUE VIEW CUBE:

1. Draw a square.
2. Draw the side view and top view by drawing a 45° angle at every point (visible outer angle) from the horizontal. (The angles all lie to the left.)
3. Measure the length of a side of the square (front view).
4. Connect the points to complete the back of the cube.

What is oblique viewing?

An oblique projection is a parallel projection in which the lines of sight are not perpendicular to the projection plane. Commonly used oblique projections orient the projection plane to be perpendicular to a coordinate axis, while moving the lines of sight to intersect two additional sides of the object.

### What is oblique pictorial drawing?

An Oblique pictorial starts with a straight-on view of one of the object’s faces, which is often the front face. Angled, parallel lines are drawn to one side to represent the object’s depth. Common oblique angles include 30°, 45°, and 60°.

What are the 3 types of oblique drawing?

Oblique drawing

• OBLIQUE DRAWING.
• OBLIQUE DRAWING : In an oblique drawing the front view is drawn true size, and the receding surfaces are drawn on an angle to give it a pictorial appearance.
• Types of OBLIQUE Drawing • Cavalier Oblique • Cabinet Oblique • General Oblique – There are three types of oblique drawing.

What are 2 types of oblique drawing?

Following are the two types of oblique projection according to construction.

• Cavalier Oblique Drawing.
• Cabinet Oblique Drawing.
• First of all orthographic projections are drawn on one side of the sheet.

#### What are the 3 oblique axes?

The word “oblique” means “slanting” There are three axes-vertical, horizontal and oblique.

Why do we use oblique drawing?

Oblique drawings are not very realistic as it is impossible to see the front of an object straight on and the side at the same time. They can be useful to sketch at speed or to show the front and side of a building.

At what angle is an oblique drawing?

What Is Oblique View? An oblique view is a pictorial view of an object that shows its elevation, plan, or a section which can be used to scale with parallel lines projected from the corners, that is at 45 degrees or any other angle, which indicates the other sides.

## What are the three oblique drawings?

What are the 2 types of oblique projection?

Oblique Projection There are two types of oblique projections − Cavalier and Cabinet. The Cavalier projection makes 45° angle with the projection plane. The projection of a line perpendicular to the view plane has the same length as the line itself in Cavalier projection.

What are the three different types of oblique projections?

Main Types of Oblique Projections

• Cavalier: Angle between projectors and projection plane is 45o. Perpendicular faces are projected at full scale.
• Cabinet: Angle between projectors and projection plane is arctan(2) = 63.4o. Perpendicular faces are projected at 50% scale.

### How to draw a cube in oblique projection?

The technique for drawing a cube in oblique projection is outlined below, stage by stage. To draw it correctly in oblique projection three main rules must be followed: 1. Draw the front or side view of the object. 2. All measurements drawn backwards are half the original measurement.

Which is an example of an oblique drawing?

The distance of any lines drawn back at 45 degrees should be halved. For example, a cube may have sides of 100mm but they must be drawn 50mm in length. This should mean that the cube will look more realistic and in proportion. ANOTHER BASIC EXAMPLE OF OBLIQUE DRAWING

How to label views in an orthographic drawing?

Labeling views is a helpful method for students to make the connection between an object and its orthographic projection (Figures 5 and 6). Figure 5—Views in an orthographic drawing Figure 6—Drawing with the glass box flattened out Drafting: Orthographic and Isometric Drawings Plumber 6Youth Explore Trades Skills